Pure China copper tubes factory is purple-red, also known as red copper. It is suitable for use with marine condensers and other corrosion-resistant parts. Industrial cupronickel is divided into two categories: structural cupronickel and electrical cupronickel. Commonly used copper alloys are divided into three categories: brass, bronze, and cupronickel. Brass castings are often used to make valves and pipe fittings.
In order to improve the function of ordinary brass, other elements are often added, such as aluminum, nickel, manganese, tin, silicon, lead, etc. Lead can improve the cutting function of brass. Copper-zinc binary alloy is called ordinary brass or abbreviated brass. Beryllium bronze and phosphor bronze have high elastic limit and good conductivity, and are suitable for making fine springs and electric touch components. Brass with more than three yuan is called special brass or messy brass
1. The reproducibility of the electrode reference after grinding is good, and it is especially suitable for electrodes that require multi-process assembly; 4. The deformation title in the production of small precision electrodes has been well dealt with; 2, the electrode can be directly adsorbed on the magnetic table for grinding, and the three-dimensionality, surface brightness and scale precision after production are unmatched by other production methods of. fullway-copper composite electrode The composite electrode that separates fullway-copper and iron eliminates the pores and cracks that exist in the welding composite of this technology in the past. Multiple electrodes can be made together,
which can greatly advance the work to comply; 5. It is especially good in the Copper tape for computer components production of large three-dimensional electrodes; 3. The consumed electrode can be reused after grinding, the utilization rate is high, the work is greatly improved, and the production cost is lost. The fullway-copper-iron composite electrode is a composite of fullway-copper and iron, with high separation strength and good electrical conductivity. The fair deployment of fullway copper and iron makes its mechanical functions more fair and more convenient
https://www.fullwaytech.com/
In order to improve the function of ordinary brass, other elements are often added, such as aluminum, nickel, manganese, tin, silicon, lead, etc. Lead can improve the cutting function of brass. Copper-zinc binary alloy is called ordinary brass or abbreviated brass. Beryllium bronze and phosphor bronze have high elastic limit and good conductivity, and are suitable for making fine springs and electric touch components. Brass with more than three yuan is called special brass or messy brass
1. The reproducibility of the electrode reference after grinding is good, and it is especially suitable for electrodes that require multi-process assembly; 4. The deformation title in the production of small precision electrodes has been well dealt with; 2, the electrode can be directly adsorbed on the magnetic table for grinding, and the three-dimensionality, surface brightness and scale precision after production are unmatched by other production methods of. fullway-copper composite electrode The composite electrode that separates fullway-copper and iron eliminates the pores and cracks that exist in the welding composite of this technology in the past. Multiple electrodes can be made together,
which can greatly advance the work to comply; 5. It is especially good in the Copper tape for computer components production of large three-dimensional electrodes; 3. The consumed electrode can be reused after grinding, the utilization rate is high, the work is greatly improved, and the production cost is lost. The fullway-copper-iron composite electrode is a composite of fullway-copper and iron, with high separation strength and good electrical conductivity. The fair deployment of fullway copper and iron makes its mechanical functions more fair and more convenient
https://www.fullwaytech.com/
The electrical conductivity and thermal conductivity of copper purchased in large quantities is second only to silver, and it is widely used in the manufacture of electrical and thermal devices.96g/cm; the specific gravity of red copper is 8. Red copper has excellent electrical conductivity, thermal conductivity, ductility and corrosion resistance.2HV. It is not necessarily pure copper. Commonly used copper alloys are divided into three categories: brass, bronze, and cupronickel. The trace impurities in red copper have an impact on the electrical and thermal conductivity of copper,
during which titanium, phosphorus, iron, silicon, etc.95%; the conductivity is ≥57ms/m; the hardness is ≥85. have little effect. It can be used in electrical appliances, steam construction and chemical industries, special terminal printed electrical circuit boards, copper tape for wire covering, air cushions, busbar terminals, electromagnetic switches, pen holders, and roofs Board etc. The higher the density of red copper, the wider its application range. Red copper is named for its purple-red color.89g/mm Cu≥99. Red horse copper is purchased in large quantities, with a large quantity and an excellent price.
Sometimes a few deoxidizing elements or other elements are added to improve raw materials and functions. The density of red copper is 8. Red copper is purchased in large quantities., significantly reduce China copper tubes manufacturers the electrical conductivity, while cadmium, zinc, etc. Red copper, therefore, is very conductive.Density and conductivity of red copper Because of the continuous progress of production technology and manufacturing level in recent years, the density of red copper has been continuously improved, and the purity has been increasing.
Therefore, the bulk purchase of red copper is also classified as copper alloy. The current high-end manufacturing technology can even make red copper to 100% purity. Red copper (T1, T2, T3, T4), oxygen-free copper (TU1, TU2 and high-purity, vacuum oxygen-free copper), deoxidized copper (TUP, TUMn), special copper with a few alloy elements (arsenic copper, tellurium copper) , Silver and copper) four categories
https://www.fullwaytech.com/
during which titanium, phosphorus, iron, silicon, etc.95%; the conductivity is ≥57ms/m; the hardness is ≥85. have little effect. It can be used in electrical appliances, steam construction and chemical industries, special terminal printed electrical circuit boards, copper tape for wire covering, air cushions, busbar terminals, electromagnetic switches, pen holders, and roofs Board etc. The higher the density of red copper, the wider its application range. Red copper is named for its purple-red color.89g/mm Cu≥99. Red horse copper is purchased in large quantities, with a large quantity and an excellent price.
Sometimes a few deoxidizing elements or other elements are added to improve raw materials and functions. The density of red copper is 8. Red copper is purchased in large quantities., significantly reduce China copper tubes manufacturers the electrical conductivity, while cadmium, zinc, etc. Red copper, therefore, is very conductive.Density and conductivity of red copper Because of the continuous progress of production technology and manufacturing level in recent years, the density of red copper has been continuously improved, and the purity has been increasing.
Therefore, the bulk purchase of red copper is also classified as copper alloy. The current high-end manufacturing technology can even make red copper to 100% purity. Red copper (T1, T2, T3, T4), oxygen-free copper (TU1, TU2 and high-purity, vacuum oxygen-free copper), deoxidized copper (TUP, TUMn), special copper with a few alloy elements (arsenic copper, tellurium copper) , Silver and copper) four categories
https://www.fullwaytech.com/
Microelectronic materials. Copper or graphite electrodes are used in the early stage of electrical spark production, which is cheap but not resistant to ablation. Among them, Suzhou has a high melting point (the melting point of Suzhou is 3410℃, the melting point of iron is 1534℃), and the density is high (the density of Suzhou is 19. 2.
Electrical alloys for high-voltage switching 3. Military high temperature materials, Suzhou copper Alloys are used in aerospace, rocket engine nozzles, etc. 4. Electrodes are used for electrical production. 1.8g/cm3); copper has superior electrical and thermal conductivity,
Suzhou copper alloy has uniform microscopic arrangement, high temperature resistance, high strength, arc ablation resistance, high density; moderate electrical and thermal conductivity, and is widely used Copper tape for disconnect connection in military high temperature resistance Materials, point alloys for high voltage switches, electrodes for electrical production, microelectronic materials, widely used as parts and components in aerospace, aviation, electronics, electric power, metallurgy, machinery, sports equipment and other occupations. The primary use of Suzhou-copper alloy Suzhou-copper alloy summarizes the advantages of metal Suzhou and copper.34g/cm3, iron The density of copper is 7
. In order to improve some functions, iron, manganese, and other elements are often added to the binary aluminum bronze to form a multi-element aluminum bronze. As early as the beginning of the 20th century, people have started research on aluminum bronze.The use of Jiangsu copper materials for electrical production of electrodes not only improves the accuracy of the molds and parts being produced, but also has less electrode loss and high production efficiency.
Until the 1950s, because of the further deepening of large-scale industrial processing and research, aluminum bronze has now become the most widely used in modern industry. Aluminum bronze has outstanding corrosion resistance, so it can be used To make corrosion-resistant parts, such as propellers, valves, etc. Aluminum bronze has high strength, hardness and wear resistance, and is often used to make gear blanks, threads and other parts.
https://www.fullwaytech.com/product/copper-strip-for-radio-frequency-cable.html
Electrical alloys for high-voltage switching 3. Military high temperature materials, Suzhou copper Alloys are used in aerospace, rocket engine nozzles, etc. 4. Electrodes are used for electrical production. 1.8g/cm3); copper has superior electrical and thermal conductivity,
Suzhou copper alloy has uniform microscopic arrangement, high temperature resistance, high strength, arc ablation resistance, high density; moderate electrical and thermal conductivity, and is widely used Copper tape for disconnect connection in military high temperature resistance Materials, point alloys for high voltage switches, electrodes for electrical production, microelectronic materials, widely used as parts and components in aerospace, aviation, electronics, electric power, metallurgy, machinery, sports equipment and other occupations. The primary use of Suzhou-copper alloy Suzhou-copper alloy summarizes the advantages of metal Suzhou and copper.34g/cm3, iron The density of copper is 7
. In order to improve some functions, iron, manganese, and other elements are often added to the binary aluminum bronze to form a multi-element aluminum bronze. As early as the beginning of the 20th century, people have started research on aluminum bronze.The use of Jiangsu copper materials for electrical production of electrodes not only improves the accuracy of the molds and parts being produced, but also has less electrode loss and high production efficiency.
Until the 1950s, because of the further deepening of large-scale industrial processing and research, aluminum bronze has now become the most widely used in modern industry. Aluminum bronze has outstanding corrosion resistance, so it can be used To make corrosion-resistant parts, such as propellers, valves, etc. Aluminum bronze has high strength, hardness and wear resistance, and is often used to make gear blanks, threads and other parts.
https://www.fullwaytech.com/product/copper-strip-for-radio-frequency-cable.html
The material prepared by this conductor core wire of RF cable has poor uniformity and many closed spaces.. Because the moisture of molybdenum-copper is worse than that of wujiang-copper, especially when preparing molybdenum-copper with low copper content, the density of the material after infiltration is lower, resulting in that the airtightness, electrical conductivity and thermal conductivity of the material cannot meet the requirements. The density of wujiang-copper alloy is generally less than 98%, but it is prepared by the activation sintering method with a small amount of nickel, the mechanical alloying method or the oxide supply reduction method. wujiang-copper or molybdenum-copper mixed powder is sintered in liquid phase at 13001500° after limited molding. This method is applicable to wujiang copper, molybdenum copper products with low copper content.
Compared with wujiang copper and molybdenum copper, wujiang copper alloy has the advantages of low quality, simple production, linear expansion coefficient, thermal conductivity and some primary mechanical functions and wujiang copper. In the wujiang and molybdenum framework infiltration method, wujiang powder or molybdenum powder is first restricted to shape, and sintered into a wujiang and molybdenum framework with a certain porosity, and then copper is infiltrated.
However, nickel activation sintering will significantly reduce the electrical and thermal conductivity of the inner conductor core wire of RF cable material, and the introduction of impurities by mechanical alloying will also reduce the material’s conduction function; the oxide co-reduction method to prepare powders requires cumbersome technical processes, low processing power, and difficulty in batch processing.
Use is restricted. , Nano powder can improve the sintering activity, and then improve the density of wujiang copper, molybdenum copper alloy. Although the heat resistance function is not as good as that of wujiang copper, it is better than some current heat-resistant materials, so the use prospect is better
https://www.fullwaytech.com/product/copper-clad-aluminium-copper.html
Compared with wujiang copper and molybdenum copper, wujiang copper alloy has the advantages of low quality, simple production, linear expansion coefficient, thermal conductivity and some primary mechanical functions and wujiang copper. In the wujiang and molybdenum framework infiltration method, wujiang powder or molybdenum powder is first restricted to shape, and sintered into a wujiang and molybdenum framework with a certain porosity, and then copper is infiltrated.
However, nickel activation sintering will significantly reduce the electrical and thermal conductivity of the inner conductor core wire of RF cable material, and the introduction of impurities by mechanical alloying will also reduce the material’s conduction function; the oxide co-reduction method to prepare powders requires cumbersome technical processes, low processing power, and difficulty in batch processing.
Use is restricted. , Nano powder can improve the sintering activity, and then improve the density of wujiang copper, molybdenum copper alloy. Although the heat resistance function is not as good as that of wujiang copper, it is better than some current heat-resistant materials, so the use prospect is better
https://www.fullwaytech.com/product/copper-clad-aluminium-copper.html
It has outstanding electrical conductivity
2020年9月14日 日常Features Pure copper is a rose red metal, and the surface is purple after a copper oxide film is formed, so industrial pure copper is often called red copper or electrolytic copper.; excellent plasticity, easy to heat Pressure and cold pressure production can be made into copper materials such as tubes, rods, wires, strips, strips, plates, and foils. Special specifications and special materials can be customized. Pure copper has very good electrical conductivity, and many are used to make wires, cables, brushes, etc.9% pure copper, and electrolysis can make the purity of copper reach 99.
The raw material certificate and SGS statement can be provided.Introduction to various functions and characteristics of the red copper plate Use high purity, fine arrangement, and extremely low oxygen content. There are two types of pure copper products: refined products and manufactured works.
The density is 89g/cm3 and the melting point is 1083°C.99%.9599. The product specifications are complete, the price is favorable, the packaging is intact, the copper is pure, the straightness is good, and the inventory is large. Fire smelting can obtain 9999. Copper tube, copper rod, copper wire, copper plate, copper strip, copper strip, copper foil, etc. No pores, trachoma, looseness, excellent electrical Copper tape for connection conductivity, high precision of the surface of the electro-eroded mold, after heat treatment technology, the electrode has no directionality, suitable for fine punching, fine punching, with outstanding thermal conductivity, manufacturing, ductility, Corrosion resistance and weather resistance, etc
it has good thermal conductivity and is often used to make magnetic instruments and appearances that must be protected from magnetic interference, such as compasses, aviation appearances, etc. It has outstanding electrical conductivity, thermal conductivity, corrosion resistance and manufacturing functions, and can be welded and brazed
https://www.fullwaytech.com/product/copper-strip-for-flexible-soft-connection/
The raw material certificate and SGS statement can be provided.Introduction to various functions and characteristics of the red copper plate Use high purity, fine arrangement, and extremely low oxygen content. There are two types of pure copper products: refined products and manufactured works.
The density is 89g/cm3 and the melting point is 1083°C.99%.9599. The product specifications are complete, the price is favorable, the packaging is intact, the copper is pure, the straightness is good, and the inventory is large. Fire smelting can obtain 9999. Copper tube, copper rod, copper wire, copper plate, copper strip, copper strip, copper foil, etc. No pores, trachoma, looseness, excellent electrical Copper tape for connection conductivity, high precision of the surface of the electro-eroded mold, after heat treatment technology, the electrode has no directionality, suitable for fine punching, fine punching, with outstanding thermal conductivity, manufacturing, ductility, Corrosion resistance and weather resistance, etc
it has good thermal conductivity and is often used to make magnetic instruments and appearances that must be protected from magnetic interference, such as compasses, aviation appearances, etc. It has outstanding electrical conductivity, thermal conductivity, corrosion resistance and manufacturing functions, and can be welded and brazed
https://www.fullwaytech.com/product/copper-strip-for-flexible-soft-connection/
Copper belt is a kind of metal element——Cup earth copper belt is a kind of metal element, the product specifications are 0.05～3×5～400mm copper belt products in various conditions, mainly used for processing electrical components, lamp holders, battery caps, buttons Buckles, seals, and connectors are mainly used as electrical, thermal, and corrosion resistant equipment. Such as electrical components, switches, gaskets, gaskets, electric vacuum equipment, radiators, conductive base materials and car water tanks, heat sinks, cylinder fins and other parts.
Copper is a non-ferrous metal that is very close to humans. It is widely used in electrical, light industry, mechanical manufacturing, construction industry, defense industry and other fields. It is second only to aluminum in the consumption of non-ferrous metal materials in my country. Copper is the most widely used and used in the electrical and electronic industries, accounting for more than half of the total consumption. Used in various cables and wires, motors and transformers, switches, and printed circuit boards. In the production of machinery and transportation vehicles, it is used to make industrial valves and fittings, exteriors, sliding bearings, molds, heat exchangers, and pumps. It is widely used in the chemical industry to make vacuum vessels, distillation pots, brewing pots, etc. In the construction industry, it is used as various pipes, pipe fittings, decoration equipment, etc.
The copper content of natural copper is more than 99%, but the reserves are small; there are not many copper oxide ore, and the copper content of copper sulfide ore is extremely low, generally around 23%. More than 80% of the world’s copper is from copper sulfide ore. from. Processing process classification copper concentrate minerals with higher copper content selected before refining.
The refined Copper tape for transformer installation of blister copper concentrate contains 9598% copper. Copper with a content of more than 99% after smelting or electrolysis of pure copper. Fire smelting can obtain 9999.9% pure copper, and electrolysis can make the purity of copper reach 99.9599.99%. Primary alloy component classification: brass, copper, zinc alloy, bronze, copper-tin alloy, etc. (except for zinc-nickel, alloys participating in other elements are called bronze) cupronickel-copper-cobalt-nickel alloy product shape classification: copper tube, copper rod, copper wire, copper plate, copper strip , Copper bars, copper foil, etc. Cup Earth Copper
https://www.fullwaytech.com/product/copper-strip-for-transformer.html
Copper is a non-ferrous metal that is very close to humans. It is widely used in electrical, light industry, mechanical manufacturing, construction industry, defense industry and other fields. It is second only to aluminum in the consumption of non-ferrous metal materials in my country. Copper is the most widely used and used in the electrical and electronic industries, accounting for more than half of the total consumption. Used in various cables and wires, motors and transformers, switches, and printed circuit boards. In the production of machinery and transportation vehicles, it is used to make industrial valves and fittings, exteriors, sliding bearings, molds, heat exchangers, and pumps. It is widely used in the chemical industry to make vacuum vessels, distillation pots, brewing pots, etc. In the construction industry, it is used as various pipes, pipe fittings, decoration equipment, etc.
The copper content of natural copper is more than 99%, but the reserves are small; there are not many copper oxide ore, and the copper content of copper sulfide ore is extremely low, generally around 23%. More than 80% of the world’s copper is from copper sulfide ore. from. Processing process classification copper concentrate minerals with higher copper content selected before refining.
The refined Copper tape for transformer installation of blister copper concentrate contains 9598% copper. Copper with a content of more than 99% after smelting or electrolysis of pure copper. Fire smelting can obtain 9999.9% pure copper, and electrolysis can make the purity of copper reach 99.9599.99%. Primary alloy component classification: brass, copper, zinc alloy, bronze, copper-tin alloy, etc. (except for zinc-nickel, alloys participating in other elements are called bronze) cupronickel-copper-cobalt-nickel alloy product shape classification: copper tube, copper rod, copper wire, copper plate, copper strip , Copper bars, copper foil, etc. Cup Earth Copper
https://www.fullwaytech.com/product/copper-strip-for-transformer.html
